当前位置: 首页 > news >正文

linux备份命令小记 —— 筑梦之路

Linux dump命令用于备份文件系统。

dump为备份工具程序,可将目录或整个文件系统备份至指定的设备,或备份成一个大文件。

dump命令只可以备份ext2/3/4格式的文件系统

centos7默认未安装dump命令,可以使用yum install -y dump安装此命令。

全量备份/boot分区

[root@s135 ~]# dump -0uj -f /root/boot.bak.bz2 /boot/
DUMP: Date of this level 0 dump: Fri Jul 30 16:10:06 2021
DUMP: Dumping /dev/sda1 (/boot) to /root/boot.bak.bz2
DUMP: Label: none
DUMP: Writing 10 Kilobyte records
DUMP: Compressing output at compression level 2 (bzlib)
DUMP: mapping (Pass I) [regular files]
DUMP: mapping (Pass II) [directories]
DUMP: estimated 115437 blocks.
DUMP: Volume 1 started with block 1 at: Fri Jul 30 16:10:06 2021
DUMP: dumping (Pass III) [directories]
DUMP: dumping (Pass IV) [regular files]
DUMP: Closing /root/boot.bak.bz2
DUMP: Volume 1 completed at: Fri Jul 30 16:10:22 2021
DUMP: Volume 1 took 0:00:16
DUMP: Volume 1 transfer rate: 6656 kB/s
DUMP: Volume 1 116040kB uncompressed, 106506kB compressed, 1.090:1
DUMP: 116040 blocks (113.32MB) on 1 volume(s)
DUMP: finished in 16 seconds, throughput 7252 kBytes/sec
DUMP: Date of this level 0 dump: Fri Jul 30 16:10:06 2021
DUMP: Date this dump completed: Fri Jul 30 16:10:22 2021
DUMP: Average transfer rate: 6656 kB/s
DUMP: Wrote 116040kB uncompressed, 106506kB compressed, 1.090:1
DUMP: DUMP IS DONE[root@s135 ~]# ll -h /root/
总用量 105M
-rw-------. 1 root root 1.8K 7月 30 16:03 anaconda-ks.cfg
-rw-r–r--. 1 root root 105M 7月 30 16:10 boot.bak.bz2[root@s135 ~]# df -hT
文件系统 类型 容量 已用 可用 已用% 挂载点
/dev/mapper/centos-root ext4 9.8G 1.2G 8.1G 13% /
devtmpfs devtmpfs 908M 0 908M 0% /dev
tmpfs tmpfs 919M 0 919M 0% /dev/shm
tmpfs tmpfs 919M 8.5M 911M 1% /run
tmpfs tmpfs 919M 0 919M 0% /sys/fs/cgroup
/dev/sda1 ext4 976M 115M 795M 13% /boot
/dev/mapper/centos-home ext4 17G 45M 16G 1% /home
tmpfs tmpfs 184M 0 184M 0% /run/user/0

增量备份/boot分区

在/boot分区创建一个测试文件hi.txt[root@s135 ~]# cd /boot/
[root@s135 boot]# touch hi.txt
[root@s135 boot]# echo “this is a test” > hi.txt然后增量备份/boot分区[root@s135 ~]# dump -1uj -f /root/boot.bak1.bz2 /boot/
DUMP: Date of this level 1 dump: Fri Jul 30 16:17:15 2021
DUMP: Date of last level 0 dump: Fri Jul 30 16:16:41 2021
DUMP: Dumping /dev/sda1 (/boot) to /root/boot.bak1.bz2
DUMP: Label: none
DUMP: Writing 10 Kilobyte records
DUMP: Compressing output at compression level 2 (bzlib)
DUMP: mapping (Pass I) [regular files]
DUMP: mapping (Pass II) [directories]
DUMP: estimated 39 blocks.
DUMP: Volume 1 started with block 1 at: Fri Jul 30 16:17:15 2021
DUMP: dumping (Pass III) [directories]
DUMP: dumping (Pass IV) [regular files]
DUMP: Closing /root/boot.bak1.bz2
DUMP: Volume 1 completed at: Fri Jul 30 16:17:15 2021
DUMP: 40 blocks (0.04MB) on 1 volume(s)
DUMP: finished in less than a second
DUMP: Date of this level 1 dump: Fri Jul 30 16:17:15 2021
DUMP: Date this dump completed: Fri Jul 30 16:17:15 2021
DUMP: Average transfer rate: 0 kB/s
DUMP: Wrote 40kB uncompressed, 11kB compressed, 3.637:1
DUMP: DUMP IS DONE查看增量备份文件大小[root@s135 ~]# ll -h /root
总用量 105M
-rw-------. 1 root root 1.8K 7月 30 16:03 anaconda-ks.cfg
-rw-r–r--. 1 root root 12K 7月 30 16:17 boot.bak1.bz2
-rw-r–r--. 1 root root 105M 7月 30 16:10 boot.bak.bz2

查询分区的最新备份记录

[root@s135 ~]# dump -W
Last dump(s) done (Dump ‘>’ file systems):
/dev/mapper/centos-root ( /) Last dump: never
/dev/sda1 ( /boot) Last dump: Level 1, Date Fri Jul 30 16:17:15 2021
/dev/mapper/centos-home ( /home) Last dump: never

备份文件或目录

备份文件和目录只能使用0级别,即只能全量备份

[root@s135 ~]# dump -0j -f /home/etc.dump.bz2 /etc/
DUMP: Date of this level 0 dump: Fri Jul 30 16:23:29 2021
DUMP: Dumping /dev/mapper/centos-root (/ (dir etc)) to /home/etc.dump.bz2
DUMP: Label: none
DUMP: Writing 10 Kilobyte records
DUMP: Compressing output at compression level 2 (bzlib)
DUMP: mapping (Pass I) [regular files]
DUMP: mapping (Pass II) [directories]
DUMP: estimated 35010 blocks.
DUMP: Volume 1 started with block 1 at: Fri Jul 30 16:23:30 2021
DUMP: dumping (Pass III) [directories]
DUMP: dumping (Pass IV) [regular files]
DUMP: Closing /home/etc.dump.bz2
DUMP: Volume 1 completed at: Fri Jul 30 16:23:35 2021
DUMP: Volume 1 took 0:00:05
DUMP: Volume 1 transfer rate: 2470 kB/s
DUMP: Volume 1 39190kB uncompressed, 12350kB compressed, 3.174:1
DUMP: 39190 blocks (38.27MB) on 1 volume(s)
DUMP: finished in 5 seconds, throughput 7838 kBytes/sec
DUMP: Date of this level 0 dump: Fri Jul 30 16:23:29 2021
DUMP: Date this dump completed: Fri Jul 30 16:23:35 2021
DUMP: Average transfer rate: 2470 kB/s
DUMP: Wrote 39190kB uncompressed, 12350kB compressed, 3.174:1
DUMP: DUMP IS DONE
dump [参数]
常用参数参数说明
-0123456789备份的层级
-b指定区块的大小,单位为KB
-B指定备份卷册的区块数目
-c修改备份磁带预设的密度与容量
-d设置磁带的密度。单位为BPI
-f指定备份设备
-h当备份层级等于或大于指定的层级时,将不备份用户标示为”nodump”的文件
-j使用bzlib库压缩备份文件
-n当备份工作需要管理员介入时,向所有”operator”群组中的使用者发出通
-s备份磁带的长度,单位为英尺
-T指定开始备份的时间与日期
-u备份完毕后,在/etc/dumpdates中记录备份的文件系统,层级,日期与时间等
-w与-W类似,但仅显示需要备份的文件
-W显示需要备份的文件及其最后一次备份的层级,时间与日期
http://www.lryc.cn/news/7099.html

相关文章:

  • vue项目(vue-cli)配置环境变量和打包时区分开发、测试、生产环境
  • Python 命名规范
  • 操作系统——2.操作系统的特征
  • 【计算机网络期末复习】第六章 应用层
  • TypeScript基本教程
  • 使用Windows API实现本地音频采集
  • 实用的费曼学习法 | 一些思考
  • Linux安装Docker配置docker-compose 编排工具【超详细】
  • iTerm2 + Oh My Zsh 打造舒适终端体验
  • 【scipy.sparse】diags()和dia_matrix()的区别
  • java ssm自行车在线租赁系统idea
  • GAN和CycleGAN
  • 源码项目中常见设计模式及实现
  • KDNM5000-10A-2剩余电流保护器测试仪
  • C++实现线程池
  • 2023最新Java面试手册(性能优化+微服务架构+并发编程+开源框架)
  • 对灵敏度分析技术进行建模(Matlab代码实现)
  • 完整爬虫学习笔记(第一章)
  • 会计师项目管理软件是什么,哪些必不可少的功能
  • 第 8 章 优化
  • 剑指offer -- java题解
  • 若依ruoyi——手把手教你制作自己的管理系统【二、修改样式】
  • 2023.2.14每日一题——455. 分发饼干
  • MySQL入门篇-MySQL常用字符函数小结
  • 解决不同影像裁剪后栅格数据行列不一致问题
  • visual studio2022配置opencv
  • 什么是销售管理?销售管理的五大职能
  • [CVPR‘22] EG3D: Efficient Geometry-aware 3D Generative Adversarial Networks
  • Learning C++ No.9【STL No.1】
  • Apifox推荐-django后台验证token配置