OEC 刷机Armbain 25.05后配置说明

DHCP 调整为固定IP

nano  /etc/netplan/00-default-use-network-manager.yaml

# Added by Armbian
#
# Reference: https://netplan.readthedocs.io/en/stable/netplan-yaml/
#
# Let NetworkManager manage all devices on this system.
# Any device will come up with DHCP, once carrier is detected.
# This is basically Netplan passing control over to NetworkManager at boot time.

network:
version: 2
renderer: NetworkManager
ethernets:
eth0:  # 根据你的网络接口名称更改，例如eth1, enp3s0等
dhcp4: no
addresses: [10.0.0.178/24]  # 你的IP地址和子网掩码
gateway4: 10.0.0.1          # 网关地址
nameservers:
addresses: [8.8.8.8, 8.8.4.4]

挂载SSD硬盘

nano /etc/fstab

UUID=7ba6f126-a3e1-4fc2-b934-40f23013bf65  /      ext4  defaults,noatime,nodiratime,commit=600,errors=remount-ro  0 1
LABEL=BOOT_EMMC  /boot  ext4  defaults  0 2
tmpfs           /tmp     tmpfs    defaults,nosuid                                             0 0UUID=94460f0e-89ea-47fb-a80a-a748262aec46 /store ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro  0 0

开启SAMBA共享 apt install samba

nano /etc/samba/smb.conf

[global]
workgroup = SAMBA
security = user
map to guest=Bad User
passdb backend = tdbsam

        printing = cups
printcap name = cups
load printers = yes
cups options = raw

[store]
comment=oec
path=/store
writable=yes
public=yes
browseable=yes
writable=yes
create mask=0644

MacBook M1访问测试  显示-> 连接服务器 smb://10.0.0.178 选访客 不输入帐号密码

就可以在访达中访问smb服务。