简介openwrt系统下/etc/config/network文件生成过程
openwrt的network文件，或者说在/etc/config下的文件，都是动态生成的。
脚本的函数定义在package/base-files/files/lib/functions中，有以下几个文件：
libra@SVN:~/Wang_SP4/openwrt-d03dc49/package/base-files/files/lib/functions$ ls leds.sh migrations.sh network.sh preinit.sh service.sh system.sh uci-defaults.sh
其中uci-defaults.sh会生成默认的/etc/config下的文件，而其它文件是它的“库”。
我们看一看uci-default.sh的内容
#!/bin/sh
# Copyright (C) 2011 OpenWrt.org
UCIDEF_LEDS_CHANGED=0
ucidef_set_led_netdev() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local dev=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='netdev'
set system.$cfg.dev='$dev'
set system.$cfg.mode='link tx rx'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_usbdev() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local dev=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='usbdev'
set system.$cfg.dev='$dev'
set system.$cfg.interval='50'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_wlan() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local trigger=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_switch() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local trigger=$4
local port_mask=$5
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
set system.$cfg.port_mask='$port_mask'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_default() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local default=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.default='$default'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_rssi() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local iface=$4
local minq=$5
local maxq=$6
local offset=$7
local factor=$8
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='rssi'
set system.$cfg.iface='rssid_$iface'
set system.$cfg.minq='$minq'
set system.$cfg.maxq='$maxq'
set system.$cfg.offset='$offset'
set system.$cfg.factor='$factor'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_rssimon() {
local dev="$1"
local refresh="$2"
local threshold="$3"
local cfg="rssid_$dev"
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='rssid'
set system.$cfg.dev='$dev'
set system.$cfg.refresh='$refresh'
set system.$cfg.threshold='$threshold'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_commit_leds()
{
[ "$UCIDEF_LEDS_CHANGED" == "1" ] && uci commit system
}
ucidef_set_interface_loopback() {
uci batch <<EOF
set network.loopback='interface'
set network.loopback.ifname='lo'
set network.loopback.proto='static'
set network.loopback.ipaddr='127.0.0.1'
set network.loopback.netmask='255.0.0.0'
set network.globals='globals'
set network.globals.ula_prefix='auto'
EOF
}
ucidef_set_interface_raw() {
local cfg=$1
local ifname=$2
uci batch <<EOF
set network.$cfg='interface'
set network.$cfg.ifname='$ifname'
set network.$cfg.proto='none'
EOF
}
ucidef_set_interface_lan() {
local ifname=$1
uci batch <<EOF
set network.lan='interface'
set network.lan.ifname='$ifname'
set network.lan.force_link=1
set network.lan.type='bridge'
set network.lan.proto='static'
set network.lan.ipaddr='192.168.1.1'
set network.lan.netmask='255.255.255.0'
set network.lan.ip6assign='60'
EOF
}
ucidef_set_interface_wan() {
local ifname=$1
uci batch <<EOF
set network.wan='interface'
set network.wan.ifname='$ifname'
set network.wan.proto='dhcp'
set network.wan6='interface'
set network.wan6.ifname='@wan'
set network.wan6.proto='dhcpv6'
EOF
}
ucidef_set_interfaces_lan_wan() {
local lan_ifname=$1
local wan_ifname=$2
ucidef_set_interface_lan "$lan_ifname"
ucidef_set_interface_wan "$wan_ifname"
}
ucidef_set_interface_macaddr() {
local ifname=$1
local mac=$2
uci batch <<EOF
set network.$ifname.macaddr='$mac'
EOF
}
ucidef_add_switch() {
local name=$1
local reset=$2
local enable=$3
uci batch <<EOF
add network switch
set network.@switch[-1].name='$name'
set network.@switch[-1].reset='$reset'
set network.@switch[-1].enable_vlan='$enable'
EOF
}
ucidef_add_switch_vlan() {
local device=$1
local vlan=$2
local ports=$3
uci batch <<EOF
add network switch_vlan
set network.@switch_vlan[-1].device='$device'
set network.@switch_vlan[-1].vlan='$vlan'
set network.@switch_vlan[-1].ports='$ports'
EOF
}
ucidef_add_switch_port() {
local device=$1
local port=$2
uci batch <<EOF
add network switch_port
set network.@switch_port[-1].device='$device'
set network.@switch_port[-1].port='$port'
EOF
}
看到了吧，改这里的内容就会改到openwrt固件的默认配置了。
调用这些库的函数在这里：
libra@SVN:~/Wang_SP4/openwrt-d03dc49/target/linux/ramips/base-files/etc/board.d$ ls 01_leds 02_network 03_gpio_switches
libra@SVN:~/Wang_SP4/openwrt-d03dc49/package/base-files/files/bin$ ls
board_detect config_generate ipcalc.sh
对于网络，则是config_generate 文件，看看该文件后面内容为：
json_init
json_load "$(cat ${CFG})"if [ ! -s /etc/config/network ]; thentouch /etc/config/networkgenerate_static_networkjson_get_keys keys networkfor key in $keys; do generate_network $key; donejson_get_keys keys switchfor key in $keys; do generate_switch $key; done
fiif [ ! -s /etc/config/system ]; thentouch /etc/config/systemgenerate_static_systemjson_get_keys keys rssimonfor key in $keys; do generate_rssimon $key; donejson_get_keys keys gpioswitchfor key in $keys; do generate_gpioswitch $key; donejson_get_keys keys ledfor key in $keys; do generate_led $key; done
fi
uci commit
libra@SVN:~/Wang_SP4/openwrt-d03dc49/package/base-files/files/bin$ cat config_generate
这样就清晰了。