当前位置：首页 > news >正文

STM32CubeMX stm32不限长度使用DMA收发串口数据

news 2025/8/4 1:57:21

STM32CubeMX 配置

在这里插入图片描述

代码

stm32h7xx_it.c

/*** @brief This function handles UART7 global interrupt.*/
void UART7_IRQHandler(void)
{/* USER CODE BEGIN UART7_IRQn 0 */if (UART7 == huart7.Instance) // 判断是否是空闲中断{if (__HAL_UART_GET_FLAG(&huart7, UART_FLAG_RXNE) != RESET) // 接收中断的标志位{printf("\r\nUART7 接收中断 可能超过缓冲区长度了 重启串口 \r\n");MX_UART7_Init();    //因为溢出 造成 串口不能恢复正常接收 所以重新初始化一下receives_uaru_7();        // 启用中断}if (__HAL_UART_GET_FLAG(&huart7, UART_FLAG_IDLE) == SET) // 触发空闲中断{HAL_UART_DMAStop(&huart7); // 停止本次DMA传输//printf("\r\nUART7 检测到空闲\r\n");UART_7_Callback(&huart7); // 调用用户空闲中断回调函数receives_uaru_7();        // 启用中断}}/* USER CODE END UART7_IRQn 0 */HAL_UART_IRQHandler(&huart7);/* USER CODE BEGIN UART7_IRQn 1 *//* USER CODE END UART7_IRQn 1 */
}

在这里插入图片描述

加入头文件
在这里插入图片描述
uart.h


//*********************串口7 */
// UART接收中断变量
#define RXBUFFERSIZE_7 1024          // 缓冲区长度
extern uint8_t RxBuff_7[RXBUFFERSIZE_7]; // 接收后的数据
void UART_7_Callback(UART_HandleTypeDef *huart);//空闲中断
void receives_uaru_7(void);//接收
void uart7_printf(const char *format, ...);//打印
//*********************串口7 */

在这里插入图片描述
uart.c

uint8_t RxBuff_7[RXBUFFERSIZE_7]; // 接收后的数据

在这里插入图片描述

    /* USER CODE BEGIN UART7_Init 2 */__HAL_UART_ENABLE_IT(&huart7, UART_IT_RXNE); // 开启接收中断__HAL_UART_ENABLE_IT(&huart7, UART_IT_IDLE); // 使能空闲中断receives_uaru_7();                           // 接收数据/* USER CODE END UART7_Init 2 */

在这里插入图片描述

/*用户自定义串口空闲中断回调函数
*/
void UART_7_Callback(UART_HandleTypeDef *huart)
{// 计算接收到的数据长度uint32_t data_length = RXBUFFERSIZE_7 - __HAL_DMA_GET_COUNTER(&hdma_uart7_rx);printf("数据长度(length = %d): ", data_length);printf("\r\n");// HAL_UART_Transmit(&huart1, RxBuff_7, data_length, 0x200);//串口1发送 0x200超时时间RxBuff_7[data_length] = '\0';//尾部加0//{"a":6}cJSON *json;json = cJSON_Parse((const char *)RxBuff_7);if (json != NULL){cJSON *robj = cJSON_GetObjectItem(json, "a");printf("a: %d\r\n", robj->valueint);cJSON_Delete(json);}
}
// 删除中断标志 启用 DMA 接收
void receives_uaru_7(void)
{__HAL_UART_CLEAR_IDLEFLAG(&huart7); // 清除空闲中断标志）// 重启开始DMA传输HAL_UART_Receive_DMA(&huart7, (uint8_t *)RxBuff_7, RXBUFFERSIZE_7 - 1);//预留一个字节尾部放'0'
}

在这里插入图片描述

完整代码

usart.c

/* USER CODE BEGIN Header */
/********************************************************************************* @file    usart.c* @brief   This file provides code for the configuration*          of the USART instances.******************************************************************************* @attention** Copyright (c) 2024 STMicroelectronics.* All rights reserved.** This software is licensed under terms that can be found in the LICENSE file* in the root directory of this software component.* If no LICENSE file comes with this software, it is provided AS-IS.********************************************************************************/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "usart.h"/* USER CODE BEGIN 0 */#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "cJSON.h"// #include "stdio.h"
// #include <string.h>
// #include <stdarg.h>
void cmd(char *str);
//*********************串口1 */
#define RXBUFFERSIZE_1 1          // 每接收1个字节中断1次
uint8_t RxBuff_1[RXBUFFERSIZE_1]; // 中断后数据储存位置
// 启动中断
void receives_uaru_1(void);
// UART2接收缓冲区
#define MAX_LEN_1 10
char data1[MAX_LEN_1];
// 已经接收的长度
uint8_t data_len_1 = 0;//串口7
uint8_t RxBuff_7[RXBUFFERSIZE_7]; // 接收后的数据
/* USER CODE END 0 */UART_HandleTypeDef huart7;
UART_HandleTypeDef huart1;
DMA_HandleTypeDef hdma_uart7_rx;
DMA_HandleTypeDef hdma_uart7_tx;/* UART7 init function */
void MX_UART7_Init(void)
{/* USER CODE BEGIN UART7_Init 0 *//* USER CODE END UART7_Init 0 *//* USER CODE BEGIN UART7_Init 1 *//* USER CODE END UART7_Init 1 */huart7.Instance = UART7;huart7.Init.BaudRate = 750000;huart7.Init.WordLength = UART_WORDLENGTH_8B;huart7.Init.StopBits = UART_STOPBITS_1;huart7.Init.Parity = UART_PARITY_NONE;huart7.Init.Mode = UART_MODE_TX_RX;huart7.Init.HwFlowCtl = UART_HWCONTROL_NONE;huart7.Init.OverSampling = UART_OVERSAMPLING_16;huart7.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;huart7.Init.ClockPrescaler = UART_PRESCALER_DIV1;huart7.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;if (HAL_UART_Init(&huart7) != HAL_OK){Error_Handler();}if (HAL_UARTEx_SetTxFifoThreshold(&huart7, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK){Error_Handler();}if (HAL_UARTEx_SetRxFifoThreshold(&huart7, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK){Error_Handler();}if (HAL_UARTEx_DisableFifoMode(&huart7) != HAL_OK){Error_Handler();}/* USER CODE BEGIN UART7_Init 2 */__HAL_UART_ENABLE_IT(&huart7, UART_IT_RXNE); // 开启接收中断__HAL_UART_ENABLE_IT(&huart7, UART_IT_IDLE); // 使能空闲中断receives_uaru_7();                           // 接收数据/* USER CODE END UART7_Init 2 */
}
/* USART1 init function */void MX_USART1_UART_Init(void)
{/* USER CODE BEGIN USART1_Init 0 *//* USER CODE END USART1_Init 0 *//* USER CODE BEGIN USART1_Init 1 *//* USER CODE END USART1_Init 1 */huart1.Instance = USART1;huart1.Init.BaudRate = 750000;huart1.Init.WordLength = UART_WORDLENGTH_8B;huart1.Init.StopBits = UART_STOPBITS_1;huart1.Init.Parity = UART_PARITY_NONE;huart1.Init.Mode = UART_MODE_TX_RX;huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;huart1.Init.OverSampling = UART_OVERSAMPLING_16;huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1;huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;if (HAL_UART_Init(&huart1) != HAL_OK){Error_Handler();}if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK){Error_Handler();}if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK){Error_Handler();}if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK){Error_Handler();}/* USER CODE BEGIN USART1_Init 2 */// 启用接收中断receives_uaru_1();/* USER CODE END USART1_Init 2 */
}void HAL_UART_MspInit(UART_HandleTypeDef *uartHandle)
{GPIO_InitTypeDef GPIO_InitStruct = {0};RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};if (uartHandle->Instance == UART7){/* USER CODE BEGIN UART7_MspInit 0 *//* USER CODE END UART7_MspInit 0 *//** Initializes the peripherals clock*/PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_UART7;PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1;if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK){Error_Handler();}/* UART7 clock enable */__HAL_RCC_UART7_CLK_ENABLE();__HAL_RCC_GPIOF_CLK_ENABLE();/**UART7 GPIO ConfigurationPF6     ------> UART7_RXPF7     ------> UART7_TX*/GPIO_InitStruct.Pin = GPIO_PIN_6 | GPIO_PIN_7;GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;GPIO_InitStruct.Pull = GPIO_NOPULL;GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;GPIO_InitStruct.Alternate = GPIO_AF7_UART7;HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);/* UART7 DMA Init *//* UART7_RX Init */hdma_uart7_rx.Instance = DMA1_Stream5;hdma_uart7_rx.Init.Request = DMA_REQUEST_UART7_RX;hdma_uart7_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;hdma_uart7_rx.Init.PeriphInc = DMA_PINC_DISABLE;hdma_uart7_rx.Init.MemInc = DMA_MINC_ENABLE;hdma_uart7_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;hdma_uart7_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;hdma_uart7_rx.Init.Mode = DMA_NORMAL;hdma_uart7_rx.Init.Priority = DMA_PRIORITY_VERY_HIGH;hdma_uart7_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;if (HAL_DMA_Init(&hdma_uart7_rx) != HAL_OK){Error_Handler();}__HAL_LINKDMA(uartHandle, hdmarx, hdma_uart7_rx);/* UART7_TX Init */hdma_uart7_tx.Instance = DMA2_Stream4;hdma_uart7_tx.Init.Request = DMA_REQUEST_UART7_TX;hdma_uart7_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;hdma_uart7_tx.Init.PeriphInc = DMA_PINC_DISABLE;hdma_uart7_tx.Init.MemInc = DMA_MINC_ENABLE;hdma_uart7_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;hdma_uart7_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;hdma_uart7_tx.Init.Mode = DMA_NORMAL;hdma_uart7_tx.Init.Priority = DMA_PRIORITY_HIGH;hdma_uart7_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;if (HAL_DMA_Init(&hdma_uart7_tx) != HAL_OK){Error_Handler();}__HAL_LINKDMA(uartHandle, hdmatx, hdma_uart7_tx);/* UART7 interrupt Init */HAL_NVIC_SetPriority(UART7_IRQn, 3, 0);HAL_NVIC_EnableIRQ(UART7_IRQn);/* USER CODE BEGIN UART7_MspInit 1 *//* USER CODE END UART7_MspInit 1 */}else if (uartHandle->Instance == USART1){/* USER CODE BEGIN USART1_MspInit 0 *//* USER CODE END USART1_MspInit 0 *//** Initializes the peripherals clock*/PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1;PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2;if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK){Error_Handler();}/* USART1 clock enable */__HAL_RCC_USART1_CLK_ENABLE();__HAL_RCC_GPIOB_CLK_ENABLE();/**USART1 GPIO ConfigurationPB14     ------> USART1_TXPB15     ------> USART1_RX*/GPIO_InitStruct.Pin = GPIO_PIN_14 | GPIO_PIN_15;GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;GPIO_InitStruct.Pull = GPIO_NOPULL;GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;GPIO_InitStruct.Alternate = GPIO_AF4_USART1;HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);/* USART1 interrupt Init */HAL_NVIC_SetPriority(USART1_IRQn, 0, 0);HAL_NVIC_EnableIRQ(USART1_IRQn);/* USER CODE BEGIN USART1_MspInit 1 *//* USER CODE END USART1_MspInit 1 */}
}void HAL_UART_MspDeInit(UART_HandleTypeDef *uartHandle)
{if (uartHandle->Instance == UART7){/* USER CODE BEGIN UART7_MspDeInit 0 *//* USER CODE END UART7_MspDeInit 0 *//* Peripheral clock disable */__HAL_RCC_UART7_CLK_DISABLE();/**UART7 GPIO ConfigurationPF6     ------> UART7_RXPF7     ------> UART7_TX*/HAL_GPIO_DeInit(GPIOF, GPIO_PIN_6 | GPIO_PIN_7);/* UART7 DMA DeInit */HAL_DMA_DeInit(uartHandle->hdmarx);HAL_DMA_DeInit(uartHandle->hdmatx);/* UART7 interrupt Deinit */HAL_NVIC_DisableIRQ(UART7_IRQn);/* USER CODE BEGIN UART7_MspDeInit 1 *//* USER CODE END UART7_MspDeInit 1 */}else if (uartHandle->Instance == USART1){/* USER CODE BEGIN USART1_MspDeInit 0 *//* USER CODE END USART1_MspDeInit 0 *//* Peripheral clock disable */__HAL_RCC_USART1_CLK_DISABLE();/**USART1 GPIO ConfigurationPB14     ------> USART1_TXPB15     ------> USART1_RX*/HAL_GPIO_DeInit(GPIOB, GPIO_PIN_14 | GPIO_PIN_15);/* USART1 interrupt Deinit */HAL_NVIC_DisableIRQ(USART1_IRQn);/* USER CODE BEGIN USART1_MspDeInit 1 *//* USER CODE END USART1_MspDeInit 1 */}
}/* USER CODE BEGIN 1 */
int fputc(int ch, FILE *f)
{HAL_UART_Transmit(&huart1, (uint8_t *)&ch, 1, 0xFFFF);return ch;
}
/*串口7发送数据*/
void uart7_printf(const char *format, ...)
{char buffer[256];va_list args;va_start(args, format);vsnprintf(buffer, sizeof(buffer), format, args);va_end(args);// HAL_UART_Transmit(&huart7, (uint8_t *)buffer, strlen(buffer), HAL_MAX_DELAY);//串口发送HAL_UART_Transmit_DMA(&huart7, (uint8_t *)buffer, strlen(buffer)); // DMA发送// uint8_t send_char[]="所想要发送的内容\n";//发送的字符串// HAL_UART_Transmit_DMA(&huart7,(uint8_t *)send_char, sizeof(send_char));//DMA发送 字节发送
}/*重定义串口接收回调函数
*/
// UART接收完成回调函数
void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
{// UART接收完成回调函数// 每接收一个字节中断一次if (huart->Instance == USART1){data1[data_len_1] = (char)RxBuff_1[0];data_len_1++;// 接收完成if (RxBuff_1[0] == '\n' || data_len_1 == MAX_LEN_1 - 1){                             // 接收结束为换行符data1[data_len_1] = '\0'; // 字符串结束符printf("%s", data1);cmd(data1);     // 将命令转到处理函数data_len_1 = 0; // 清空缓存}// 启用接收中断receives_uaru_1();}else if (huart->Instance == UART7) // 中断7{printf("中断\n");// receives_uaru_7(); // 启用中断}
}/*用户自定义串口空闲中断回调函数
*/
void UART_7_Callback(UART_HandleTypeDef *huart)
{// 计算接收到的数据长度uint32_t data_length = RXBUFFERSIZE_7 - __HAL_DMA_GET_COUNTER(&hdma_uart7_rx);printf("数据长度(length = %d): ", data_length);printf("\r\n");// HAL_UART_Transmit(&huart1, RxBuff_7, data_length, 0x200);//串口1发送 0x200超时时间RxBuff_7[data_length] = '\0';//尾部加0//{"a":6}cJSON *json;json = cJSON_Parse((const char *)RxBuff_7);if (json != NULL){cJSON *robj = cJSON_GetObjectItem(json, "a");printf("a: %d\r\n", robj->valueint);cJSON_Delete(json);}
}
// 删除中断标志 启用 DMA 接收
void receives_uaru_7(void)
{__HAL_UART_CLEAR_IDLEFLAG(&huart7); // 清除空闲中断标志）// 重启开始DMA传输HAL_UART_Receive_DMA(&huart7, (uint8_t *)RxBuff_7, RXBUFFERSIZE_7 - 1);//预留一个字节尾部放'0'
}
// 串口1启用中断服务程序
void receives_uaru_1(void)
{HAL_UART_Receive_IT(&huart1, (uint8_t *)RxBuff_1, RXBUFFERSIZE_1);// 该函数会开启接收中断：标志位UART_IT_RXNE，并且设置接收缓冲以及接收缓冲接收最大数据量
}void cmd(char *str)
{printf("处理数据\n");printf("\n");
}//__use_no_semihosting was requested, but _ttywrch was
void _ttywrch(int ch)
{ch = ch;
}/* USER CODE END 1 */

stm32h7xx_it.c

/* USER CODE BEGIN Header */
/********************************************************************************* @file    stm32h7xx_it.c* @brief   Interrupt Service Routines.******************************************************************************* @attention** Copyright (c) 2024 STMicroelectronics.* All rights reserved.** This software is licensed under terms that can be found in the LICENSE file* in the root directory of this software component.* If no LICENSE file comes with this software, it is provided AS-IS.********************************************************************************/
/* USER CODE END Header *//* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "stm32h7xx_it.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "usart.h"
/* USER CODE END Includes *//* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD *//* USER CODE END TD *//* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD *//* USER CODE END PD *//* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM *//* USER CODE END PM *//* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV *//* USER CODE END PV *//* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP *//* USER CODE END PFP *//* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 *//* USER CODE END 0 *//* External variables --------------------------------------------------------*/
extern DMA_HandleTypeDef hdma_uart7_rx;
extern DMA_HandleTypeDef hdma_uart7_tx;
extern UART_HandleTypeDef huart7;
extern UART_HandleTypeDef huart1;
extern TIM_HandleTypeDef htim6;/* USER CODE BEGIN EV *//* USER CODE END EV *//******************************************************************************/
/*           Cortex Processor Interruption and Exception Handlers          */
/******************************************************************************/
/*** @brief This function handles Non maskable interrupt.*/
void NMI_Handler(void)
{/* USER CODE BEGIN NonMaskableInt_IRQn 0 *//* USER CODE END NonMaskableInt_IRQn 0 *//* USER CODE BEGIN NonMaskableInt_IRQn 1 */while (1){}/* USER CODE END NonMaskableInt_IRQn 1 */
}/*** @brief This function handles Hard fault interrupt.*/
void HardFault_Handler(void)
{/* USER CODE BEGIN HardFault_IRQn 0 *//* USER CODE END HardFault_IRQn 0 */while (1){/* USER CODE BEGIN W1_HardFault_IRQn 0 *//* USER CODE END W1_HardFault_IRQn 0 */}
}/*** @brief This function handles Memory management fault.*/
void MemManage_Handler(void)
{/* USER CODE BEGIN MemoryManagement_IRQn 0 *//* USER CODE END MemoryManagement_IRQn 0 */while (1){/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 *//* USER CODE END W1_MemoryManagement_IRQn 0 */}
}/*** @brief This function handles Pre-fetch fault, memory access fault.*/
void BusFault_Handler(void)
{/* USER CODE BEGIN BusFault_IRQn 0 *//* USER CODE END BusFault_IRQn 0 */while (1){/* USER CODE BEGIN W1_BusFault_IRQn 0 *//* USER CODE END W1_BusFault_IRQn 0 */}
}/*** @brief This function handles Undefined instruction or illegal state.*/
void UsageFault_Handler(void)
{/* USER CODE BEGIN UsageFault_IRQn 0 *//* USER CODE END UsageFault_IRQn 0 */while (1){/* USER CODE BEGIN W1_UsageFault_IRQn 0 *//* USER CODE END W1_UsageFault_IRQn 0 */}
}/*** @brief This function handles System service call via SWI instruction.*/
void SVC_Handler(void)
{/* USER CODE BEGIN SVCall_IRQn 0 *//* USER CODE END SVCall_IRQn 0 *//* USER CODE BEGIN SVCall_IRQn 1 *//* USER CODE END SVCall_IRQn 1 */
}/*** @brief This function handles Debug monitor.*/
void DebugMon_Handler(void)
{/* USER CODE BEGIN DebugMonitor_IRQn 0 *//* USER CODE END DebugMonitor_IRQn 0 *//* USER CODE BEGIN DebugMonitor_IRQn 1 *//* USER CODE END DebugMonitor_IRQn 1 */
}/*** @brief This function handles Pendable request for system service.*/
void PendSV_Handler(void)
{/* USER CODE BEGIN PendSV_IRQn 0 *//* USER CODE END PendSV_IRQn 0 *//* USER CODE BEGIN PendSV_IRQn 1 *//* USER CODE END PendSV_IRQn 1 */
}/*** @brief This function handles System tick timer.*/
void SysTick_Handler(void)
{/* USER CODE BEGIN SysTick_IRQn 0 *//* USER CODE END SysTick_IRQn 0 *//* USER CODE BEGIN SysTick_IRQn 1 *//* USER CODE END SysTick_IRQn 1 */
}/******************************************************************************/
/* STM32H7xx Peripheral Interrupt Handlers                                    */
/* Add here the Interrupt Handlers for the used peripherals.                  */
/* For the available peripheral interrupt handler names,                      */
/* please refer to the startup file (startup_stm32h7xx.s).                    */
/******************************************************************************//*** @brief This function handles DMA1 stream5 global interrupt.*/
void DMA1_Stream5_IRQHandler(void)
{/* USER CODE BEGIN DMA1_Stream5_IRQn 0 *//* USER CODE END DMA1_Stream5_IRQn 0 */HAL_DMA_IRQHandler(&hdma_uart7_rx);/* USER CODE BEGIN DMA1_Stream5_IRQn 1 *//* USER CODE END DMA1_Stream5_IRQn 1 */
}/*** @brief This function handles USART1 global interrupt.*/
void USART1_IRQHandler(void)
{/* USER CODE BEGIN USART1_IRQn 0 *//* USER CODE END USART1_IRQn 0 */HAL_UART_IRQHandler(&huart1);/* USER CODE BEGIN USART1_IRQn 1 *//* USER CODE END USART1_IRQn 1 */
}/*** @brief This function handles TIM6 global interrupt, DAC1_CH1 and DAC1_CH2 underrun error interrupts.*/
void TIM6_DAC_IRQHandler(void)
{/* USER CODE BEGIN TIM6_DAC_IRQn 0 *//* USER CODE END TIM6_DAC_IRQn 0 */HAL_TIM_IRQHandler(&htim6);/* USER CODE BEGIN TIM6_DAC_IRQn 1 *//* USER CODE END TIM6_DAC_IRQn 1 */
}/*** @brief This function handles DMA2 stream4 global interrupt.*/
void DMA2_Stream4_IRQHandler(void)
{/* USER CODE BEGIN DMA2_Stream4_IRQn 0 *//* USER CODE END DMA2_Stream4_IRQn 0 */HAL_DMA_IRQHandler(&hdma_uart7_tx);/* USER CODE BEGIN DMA2_Stream4_IRQn 1 *//* USER CODE END DMA2_Stream4_IRQn 1 */
}/*** @brief This function handles UART7 global interrupt.*/
void UART7_IRQHandler(void)
{/* USER CODE BEGIN UART7_IRQn 0 */if (UART7 == huart7.Instance) // 判断是否是空闲中断{if (__HAL_UART_GET_FLAG(&huart7, UART_FLAG_RXNE) != RESET) // 接收中断的标志位{printf("\r\nUART7 接收中断 可能超过缓冲区长度了 重启串口 \r\n");MX_UART7_Init();    //因为溢出 造成 串口不能恢复正常接收 所以重新初始化一下receives_uaru_7();        // 启用中断}if (__HAL_UART_GET_FLAG(&huart7, UART_FLAG_IDLE) == SET) // 触发空闲中断{HAL_UART_DMAStop(&huart7); // 停止本次DMA传输//printf("\r\nUART7 检测到空闲\r\n");UART_7_Callback(&huart7); // 调用用户空闲中断回调函数receives_uaru_7();        // 启用中断}}/* USER CODE END UART7_IRQn 0 */HAL_UART_IRQHandler(&huart7);/* USER CODE BEGIN UART7_IRQn 1 *//* USER CODE END UART7_IRQn 1 */
}/* USER CODE BEGIN 1 *//* USER CODE END 1 */

usart.h


/* USER CODE BEGIN Header */
/********************************************************************************* @file    usart.h* @brief   This file contains all the function prototypes for*          the usart.c file******************************************************************************* @attention** Copyright (c) 2024 STMicroelectronics.* All rights reserved.** This software is licensed under terms that can be found in the LICENSE file* in the root directory of this software component.* If no LICENSE file comes with this software, it is provided AS-IS.********************************************************************************/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USART_H__
#define __USART_H__#ifdef __cplusplus
extern "C" {
#endif/* Includes ------------------------------------------------------------------*/
#include "main.h"/* USER CODE BEGIN Includes */
#include "stdio.h"
#include <string.h>
#include <stdarg.h>
/* USER CODE END Includes */extern UART_HandleTypeDef huart7;extern UART_HandleTypeDef huart1;/* USER CODE BEGIN Private defines *//* USER CODE END Private defines */void MX_UART7_Init(void);
void MX_USART1_UART_Init(void);/* USER CODE BEGIN Prototypes *///*********************串口7 */
// UART接收中断变量
#define RXBUFFERSIZE_7 8          // 缓冲区长度
extern uint8_t RxBuff_7[RXBUFFERSIZE_7]; // 接收后的数据
void UART_7_Callback(UART_HandleTypeDef *huart);//空闲中断
void receives_uaru_7(void);//接收
void uart7_printf(const char *format, ...);//打印
//*********************串口7 *//* USER CODE END Prototypes */#ifdef __cplusplus
}
#endif#endif /* __USART_H__ */