当前位置: 首页 > news >正文

华为ensp网络设计期末测试题-复盘

网络拓扑图

地址分配表

vlan端口分配表

需求

The device is running!<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en 
Info: Information center is disabled.
[Huawei]sys S1
[S1]vlan 99
[S1-vlan99]vlan 100
[S1-vlan100]des IT
[S1-vlan100]vlan 200
[S1-vlan200]des HR
[S1-vlan200]inte g0/0/21
[S1-GigabitEthernet0/0/21]p l a
[S1-GigabitEthernet0/0/21]p d v 100
[S1-GigabitEthernet0/0/21]inte g0/0/23
[S1-GigabitEthernet0/0/23]p l a 
[S1-GigabitEthernet0/0/23]p d v 100
[S1-GigabitEthernet0/0/23]inte g0/0/22
[S1-GigabitEthernet0/0/22]p l a
[S1-GigabitEthernet0/0/22]p d v 200
[S1-GigabitEthernet0/0/22]inte g0/0/24
[S1-GigabitEthernet0/0/24]p l a 
[S1-GigabitEthernet0/0/24]p d v 200
[S1-GigabitEthernet0/0/24]inte g0/0/1
[S1-GigabitEthernet0/0/1]p l a 
[S1-GigabitEthernet0/0/1]p d v 99 
[S1-GigabitEthernet0/0/1]dhcp en 
Info: The operation may take a few seconds. Please wait for a moment.done.
[S1]inte vlan 99
[S1-Vlanif99]ip ad 10.10.10.10 24
[S1-Vlanif99]inte vlan 100
[S1-Vlanif100]ip ad 192.168.1.254 24
[S1-Vlanif100]dhcp se re
[S1-Vlanif100]dhcp re se 10.10.10.1
[S1-Vlanif100]inte vlan 200
[S1-Vlanif200]ip ad 192.168.2.254 24
[S1-Vlanif200]dhcp se re
[S1-Vlanif200]dhcp re se 10.10.10.1
[S1-Vlanif200]ospf 
[S1-ospf-1]ar 0
[S1-ospf-1-area-0.0.0.0]net 192.168.1.0 0.0.0.255
[S1-ospf-1-area-0.0.0.0]net 192.168.2.0 0.0.0.255
[S1-ospf-1-area-0.0.0.0]net 10.10.10.0 0.0.0.255
[S1-ospf-1-area-0.0.0.0]
<S1>sa
The current configuration will be written to the device.
Are you sure to continue?[Y/N]y
Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]:
Now saving the current configuration to the slot 0.
Save the configuration successfully.
<S1>
<S1>
The device is running!<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]
[Huawei]un in en 
Info: Information center is disabled.
[Huawei]
[Huawei]sys route1
[route1]
[route1]dhcp en
Info: The operation may take a few seconds. Please wait for a moment.done.
[route1]
[route1]ip po pc1
Info: It's successful to create an IP address pool.
[route1-ip-pool-pc1]
[route1-ip-pool-pc1]net 192.168.1.0 ma 24
[route1-ip-pool-pc1]
[route1-ip-pool-pc1]ga 192.168.1.254
[route1-ip-pool-pc1]
[route1-ip-pool-pc1]ex 192.168.1.10
[route1-ip-pool-pc1]
[route1-ip-pool-pc1]dns 192.168.3.100
[route1-ip-pool-pc1]
[route1-ip-pool-pc1]ip po pc2
Info: It's successful to create an IP address pool.
[route1-ip-pool-pc2]
[route1-ip-pool-pc2]net 192.168.2.0 ma 24
[route1-ip-pool-pc2]
[route1-ip-pool-pc2]ga 192.168.2.254
[route1-ip-pool-pc2]
[route1-ip-pool-pc2]ex 192.168.2.10
[route1-ip-pool-pc2]
[route1-ip-pool-pc2]dns 192.168.3.100
[route1-ip-pool-pc2]
[route1-ip-pool-pc2]ip po pc3
Info: It's successful to create an IP address pool.
[route1-ip-pool-pc3]
[route1-ip-pool-pc3]net 192.168.3.0 ma 24
[route1-ip-pool-pc3]
[route1-ip-pool-pc3]ga 192.168.3.254
[route1-ip-pool-pc3]
[route1-ip-pool-pc3]ex 192.168.3.100
[route1-ip-pool-pc3]
[route1-ip-pool-pc3]dns 192.168.3.100
[route1-ip-pool-pc3]
[route1-ip-pool-pc3]inte g0/0/1
[route1-GigabitEthernet0/0/1]
[route1-GigabitEthernet0/0/1]ip ad 10.10.10.1 24
[route1-GigabitEthernet0/0/1]
[route1-GigabitEthernet0/0/1]dhcp se gl 
[route1-GigabitEthernet0/0/1]
[route1-GigabitEthernet0/0/1]inte g0/0/0
[route1-GigabitEthernet0/0/0]
[route1-GigabitEthernet0/0/0]ip ad 10.0.12.1 24
[route1-GigabitEthernet0/0/0]
[route1-GigabitEthernet0/0/0]dhcp se gl
[route1-GigabitEthernet0/0/0]ospf 
[route1-ospf-1]
[route1-ospf-1]ar 0
[route1-ospf-1-area-0.0.0.0]
[route1-ospf-1-area-0.0.0.0]net 10.0.12.0 0.0.0.255
[route1-ospf-1-area-0.0.0.0]
[route1-ospf-1-area-0.0.0.0]net 10.10.10.0 0.0.0.255
[route1-ospf-1-area-0.0.0.0]

<Huawei>.^
Error: Unrecognized command found at '^' position.
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]
[Huawei]un in en 
Info: Information center is disabled.
[Huawei]
[Huawei]sys route2
[route2]
[route2]dhcp en 
Info: The operation may take a few seconds. Please wait for a moment.done.
[route2]
[route2]inte g0/0/0
[route2-GigabitEthernet0/0/0]
[route2-GigabitEthernet0/0/0]ip ad 10.0.12.2 24
[route2-GigabitEthernet0/0/0]
[route2-GigabitEthernet0/0/0]inte g0/0/1
[route2-GigabitEthernet0/0/1]
[route2-GigabitEthernet0/0/1]ip ad 192.168.3.254 24
[route2-GigabitEthernet0/0/1]
[route2-GigabitEthernet0/0/1]dhcp select relay
[route2-GigabitEthernet0/0/1]
[route2-GigabitEthernet0/0/1]dhcp re se 10.0.12.1
[route2-GigabitEthernet0/0/1]
[route2-GigabitEthernet0/0/1]inte g0/0/2
[route2-GigabitEthernet0/0/2]
[route2-GigabitEthernet0/0/2]ip ad 200.200.200.2 24
[route2-GigabitEthernet0/0/2]
[route2-GigabitEthernet0/0/2]
[route2-GigabitEthernet0/0/2]
[route2-GigabitEthernet0/0/2]ip route-sta 0.0.0.0 0 200.200.200.3
[route2]
[route2]ospf 
[route2-ospf-1]
[route2-ospf-1]default-route-adv
[route2-ospf-1]
[route2-ospf-1]ar 0
[route2-ospf-1-area-0.0.0.0]
[route2-ospf-1-area-0.0.0.0]net 10.0.12.0 0.0.0.255
[route2-ospf-1-area-0.0.0.0]
[route2-ospf-1-area-0.0.0.0]net 192.168.3.0 0.0.0.255
[route2-ospf-1-area-0.0.0.0]
[route2-ospf-1-area-0.0.0.0]
[route2-ospf-1-area-0.0.0.0]
[route2-ospf-1-area-0.0.0.0]acl 2000
[route2-acl-basic-2000]
[route2-acl-basic-2000]ru pe so 192.168.1.0 0.0.0.255
[route2-acl-basic-2000]
[route2-acl-basic-2000]ru pe so 192.168.2.0 0.0.0.255
[route2-acl-basic-2000]
[route2-acl-basic-2000]ru pe so 192.168.3.0 0.0.0.255
[route2-acl-basic-2000]
[route2-acl-basic-2000]inte g0/0/2
[route2-GigabitEthernet0/0/2]
[route2-GigabitEthernet0/0/2]nat ou 2000
[route2-GigabitEthernet0/0/2]
[route2-GigabitEthernet0/0/2]
[route2-GigabitEthernet0/0/2]
[route2-GigabitEthernet0/0/2]acl 3000
[route2-acl-adv-3000]
[route2-acl-adv-3000]ru de ip so 192.168.1.253 0 de 192.168.3.253 0
[route2-acl-adv-3000]
[route2-acl-adv-3000]ru pe ip so a 
[route2-acl-adv-3000]
[route2-acl-adv-3000]inte g0/0/0
[route2-GigabitEthernet0/0/0]
[route2-GigabitEthernet0/0/0]traffic-filter in acl 3000
[route2-GigabitEthernet0/0/0]
[route2-GigabitEthernet0/0/0]q
[route2]us vty 0 4
[route2-ui-vty0-4]au pa 
Please configure the login password (maximum length 16):123456
[route2-ui-vty0-4]
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en 
Info: Information center is disabled.
[Huawei]sys route3
[route3]inte g0/0/2
[route3-GigabitEthernet0/0/2]ip ad 200.200.200.3 24
[route3-GigabitEthernet0/0/2]inte g0/0/0
[route3-GigabitEthernet0/0/0]ip ad 100.100.100.254 24
[route3-GigabitEthernet0/0/0]

DHCP地址获取

IP地址配置

pc1不能访问pc3

pc1可以访问其他

pc1访问外网

R2登录测试

客户端访问www.123.com

http://www.lryc.cn/news/270707.html

相关文章:

  • Dockerfile: WORKDIR vs VOLUME
  • spring ioc源码-refresh();
  • 使用递归实现深拷贝
  • 工程(十七)——自己数据集跑R2live
  • 【python高级用法】迭代器、生成器、装饰器、闭包
  • Nx市工业数据洞察:Flask、MySQL、Echarts的可视化之旅
  • 关于正态分布
  • 每日一练(编程题-C/C++)
  • Unity UnityWebRequest 在Mac上使用报CommectionError
  • WorkPlus为企业打造私有化部署IM解决方案
  • QT上位机开发(抽奖软件)
  • 雨课堂作业整理
  • C#/WPF 只允许一个实例程序运行并将已运行程序置顶
  • 【基础】【Python网络爬虫】【1.认识爬虫】什么是爬虫,爬虫分类,爬虫可以做什么
  • 【算法与数据结构】860、LeetCode柠檬水找零
  • 「Verilog学习笔记」乘法与位运算
  • CSS与JavaScript的简单认识
  • MAC 中多显示器的设置(Parallels Desktop)
  • 迁移到云原生:如何使用微服务迁移应用程序
  • kafka 的零拷贝原理
  • 华为云Stack 8.X流量模型分析(五)
  • 学习动态规划解决不同路径、最小路径和、打家劫舍、打家劫舍iii
  • nodejs微信小程序+python+PHP特困救助供养信息管理系统-计算机毕业设计推荐
  • Vue(二):计算属性与 watch 监听器
  • 25、WEB攻防——通用漏洞SQL读写注入MYSQLMSSQLPostgreSQL
  • 【第5期】前端Vue使用Proxy+Vuex(store、mutations、actions)跨域调通本地后端接口
  • 在Visual Studio(VS)编译器中,Release和Debug区别
  • 子网划分问题(实战超详解)_主机分配地址
  • 【QT】单例模式,Q_GLOBAL_STATIC 宏的使用和使用静态成员函数,eg:{简单的日志记录器}
  • 利用小红书笔记详情API:构建高效的内容创作与运营体系