当前位置：首页 > news >正文

c语言函数大全(C开头)

news 2025/7/23 5:10:10

c语言函数大全(C开头)

There is no nutrition in the blog content. After reading it, you will not only suffer from malnutrition, but also impotence.
The blog content is all parallel goods. Those who are worried about being cheated should leave quickly.

函数名: cabs
功能: 计算复数的绝对值
用法: double cabs(struct complex z);
程序例:
#include
#include
int main(void)
{
struct complex z;
double val;
z.x = 2.0;
z.y = 1.0;
val = cabs(z);
printf("The absolute value of %.2lfi %.2lfj is %.2lf", z.x, z.y, val);
return 0;
}

函数名: calloc
功能: 分配主存储器
用法: void *calloc(size_t nelem, size_t elsize);
程序例:
#include
#include
int main(void)
{
char *str = NULL;
/* allocate memory for string */
str = calloc(10, sizeof(char));
/* copy "Hello" into string */
strcpy(str, "Hello");
/* display string */
printf("String is %s\n", str);
/* free memory */
free(str);
return 0;
}

函数名: ceil
功能: 向上舍入
用法: double ceil(double x);
程序例:
#include
#include
int main(void)
{
double number = 123.54;
double down, up;
down = floor(number);
up = ceil(number);
printf("original number %5.2lf\n", number);
printf("number rounded down %5.2lf\n", down);
printf("number rounded up %5.2lf\n", up);
return 0;
}

函数名: cgets
功能: 从控制台读字符串
用法: char *cgets(char *str);
程序例:
#include
#include
int main(void)
{
char buffer[83];
char *p;
/* There's space for 80 characters plus the NULL terminator */
buffer[0] = 81;
printf("Input some chars:");
p = cgets(buffer);
printf("\ncgets read %d characters: \"%s\"\n", buffer[1], p);
printf("The returned pointer is %p, buffer[0] is at %p\n", p, &buffer);
/* Leave room for 5 characters plus the NULL terminator */
buffer[0] = 6;
printf("Input some chars:");
p = cgets(buffer);
printf("\ncgets read %d characters: \"%s\"\n", buffer[1], p);
printf("The returned pointer is %p, buffer[0] is at %p\n", p, &buffer);
return 0;
}

函数名: chdir
功能: 改变工作目录
用法: int chdir(const char *path);
程序例:
#include
#include
#include
char old_dir[MAXDIR];
char new_dir[MAXDIR];
int main(void)
{
if (getcurdir(0, old_dir))
{
perror("getcurdir()");
exit(1);
}
printf("Current directory is: \\%s\n", old_dir);
if (chdir("\\"))
{
perror("chdir()");
exit(1);
}
if (getcurdir(0, new_dir))
{
perror("getcurdir()");
exit(1);
}
printf("Current directory is now: \\%s\n", new_dir);
printf("\nChanging back to orignal directory: \\%s\n", old_dir);
if (chdir(old_dir))
{
perror("chdir()");
exit(1);
}
return 0;
}

函数名: _chmod, chmod
功能: 改变文件的访问方式
用法: int chmod(const char *filename, int permiss);
程序例:
#include
#include
#include
void make_read_only(char *filename);
int main(void)
{
make_read_only("NOTEXIST.FIL");
make_read_only("MYFILE.FIL");
return 0;
}
void make_read_only(char *filename)
{
int stat;
stat = chmod(filename, S_IREAD);
if (stat)
printf("Couldn't make %s read-only\n", filename);
else
printf("Made %s read-only\n", filename);
}

函数名: chsize
功能: 改变文件大小
用法: int chsize(int handle, long size);
程序例:
#include
#include
#include
int main(void)
{
int handle;
char buf[11] = "0123456789";
/* create text file containing 10 bytes */
handle = open("DUMMY.FIL", O_CREAT);
write(handle, buf, strlen(buf));
/* truncate the file to 5 bytes in size */
chsize(handle, 5);
/* close the file */
close(handle);
return 0;
}

函数名: circle
功能: 在给定半径以(x, y)为圆心画圆
用法: void far circle(int x, int y, int radius);
程序例:
#include
#include
#include
#include
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy;
int radius = 100;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
setcolor(getmaxcolor());
/* draw the circle */
circle(midx, midy, radius);
/* clean up */
getch();
closegraph();
return 0;
}

函数名: cleardevice
功能: 清除图形屏幕
用法: void far cleardevice(void);
程序例:
#include
#include
#include
#include
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
setcolor(getmaxcolor());
/* for centering screen messages */
settextjustify(CENTER_TEXT, CENTER_TEXT);
/* output a message to the screen */
outtextxy(midx, midy, "press any key to clear the screen:");
/* wait for a key */
getch();
/* clear the screen */
cleardevice();
/* output another message */
outtextxy(midx, midy, "press any key to quit:");
/* clean up */
getch();
closegraph();
return 0;
}

函数名: clearerr
功能: 复位错误标志
用法:void clearerr(FILE *stream);
程序例:
#include
int main(void)
{
FILE *fp;
char ch;
/* open a file for writing */
fp = fopen("DUMMY.FIL", "w");
/* force an error condition by attempting to read */
ch = fgetc(fp);
printf("%c\n",ch);
if (ferror(fp))
{
/* display an error message */
printf("Error reading from DUMMY.FIL\n");
/* reset the error and EOF indicators */
clearerr(fp);
}
fclose(fp);
return 0;
}

函数名: clearviewport
功能: 清除图形视区
用法: void far clearviewport(void);
程序例:
#include
#include
#include
#include
#define CLIP_ON 1 /* activates clipping in viewport */
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int ht;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
setcolor(getmaxcolor());
ht = textheight("W");
/* message in default full-screen viewport */
outtextxy(0, 0, "* <-- (0, 0) in default viewport");
/* create a smaller viewport */
setviewport(50, 50, getmaxx()-50, getmaxy()-50, CLIP_ON);
/* display some messages */
outtextxy(0, 0, "* <-- (0, 0) in smaller viewport");
outtextxy(0, 2*ht, "Press any key to clear viewport:");
/* wait for a key */
getch();
/* clear the viewport */
clearviewport();
/* output another message */
outtextxy(0, 0, "Press any key to quit:");
/* clean up */
getch();
closegraph();
return 0;
}

函数名: _close, close
功能: 关闭文件句柄
用法: int close(int handle);
程序例:
#include
#include
#include
#include
main()
{
int handle;
char buf[11] = "0123456789";
/* create a file containing 10 bytes */
handle = open("NEW.FIL", O_CREAT);
if (handle > -1)
{
write(handle, buf, strlen(buf));
/* close the file */
close(handle);
}
else
{
printf("Error opening file\n");
}
return 0;
}

函数名: clock
功能: 确定处理器时间
用法: clock_t clock(void);
程序例:
#include
#include
#include
int main(void)
{
clock_t start, end;
start = clock();
delay(2000);
end = clock();
printf("The time was: %f\n", (end - start) / CLK_TCK);
return 0;
}

函数名: closegraph
功能: 关闭图形系统
用法: void far closegraph(void);
程序例:
#include
#include
#include
#include
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int x, y;
/* initialize graphics mode */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error
occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
x = getmaxx() / 2;
y = getmaxy() / 2;
/* output a message */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(x, y, "Press a key to close the graphics system:");
/* wait for a key */
getch();
/* closes down the graphics system */
closegraph();
printf("We're now back in text mode.\n");
printf("Press any key to halt:");
getch();
return 0;
}

函数名: clreol
功能: 在文本窗口中清除字符到行末
用法: void clreol(void);
程序例:
#include
int main(void)
{
clrscr();
cprintf("The function CLREOL clears all characters from the\r\n");
cprintf("cursor position to the end of the line within the\r\n");
cprintf("current text window, without moving the cursor.\r\n");
cprintf("Press any key to continue . . .");
gotoxy(14, 4);
getch();
clreol();
getch();
return 0;
}

函数名: clrscr
功能: 清除文本模式窗口
用法: void clrscr(void);
程序例:
#include
int main(void)
{
int i;
clrscr();
for (i = 0; i < 20; i++)
cprintf("%d\r\n", i);
cprintf("\r\nPress any key to clear screen");
getch();
clrscr();
cprintf("The screen has been cleared!");
getch();
return 0;
}

函数名: coreleft
功能: 返回未使用内存的大小
用法: unsigned coreleft(void);
程序例:
#include
#include
int main(void)
{
printf("The difference between the highest allocated block and\n");
printf("the top of the heap is: %lu bytes\n", (unsigned long) coreleft());
return 0;
}

函数名: cos
功能: 余弦函数
用法: double cos(double x);
程序例:
#include
#include
int main(void)
{
double result;
double x = 0.5;
result = cos(x);
printf("The cosine of %lf is %lf\n", x, result);
return 0;
}

函数名: cosh
功能: 双曲余弦函数
用法: dluble cosh(double x);
程序例:
#include
#include
int main(void)
{
double result;
double x = 0.5;
result = cosh(x);
printf("The hyperboic cosine of %lf is %lf\n", x, result);
return 0;
}

函数名: country
功能: 返回与国家有关的信息
用法: struct COUNTRY *country(int countrycode, struct country *country);
程序例:
#include
#include
#define USA 0
int main(void)
{
struct COUNTRY country_info;
country(USA, &country_info);
printf("The currency symbol for the USA is: %s\n",
country_info.co_curr);
return 0;
}

函数名: cprintf
功能: 送格式化输出至屏幕
用法: int cprintf(const char *format[, argument, ...]);
程序例:
#include
int main(void)
{
/* clear the screen */
clrscr();
/* create a text window */
window(10, 10, 80, 25);
/* output some text in the window */
cprintf("Hello world\r\n");
/* wait for a key */
getch();
return 0;
}

函数名: cputs
功能: 写字符到屏幕
用法: void cputs(const char *string);
程序例:
#include
int main(void)
{
/* clear the screen */
clrscr();
/* create a text window */
window(10, 10, 80, 25);
/* output some text in the window */
cputs("This is within the window\r\n");
/* wait for a key */
getch();
return 0;
}

函数名: _creat creat
功能: 创建一个新文件或重写一个已存在的文件
用法: int creat (const char *filename, int permiss);
程序例:
#include
#include
#include
#include
int main(void)
{
int handle;
char buf[11] = "0123456789";
/* change the default file mode from text to binary */
_fmode = O_BINARY;
/* create a binary file for reading and writing */
handle = creat("DUMMY.FIL", S_IREAD | S_IWRITE);
/* write 10 bytes to the file */
write(handle, buf, strlen(buf));
/* close the file */
close(handle);
return 0;
}

函数名: creatnew
功能: 创建一个新文件
用法: int creatnew(const char *filename, int attrib);
程序例:
#include
#include
#include
#include
#include
int main(void)
{
int handle;
char buf[11] = "0123456789";
/* attempt to create a file that doesn't already exist */
handle = creatnew("DUMMY.FIL", 0);
if (handle == -1)
printf("DUMMY.FIL already exists.\n");
else
{
printf("DUMMY.FIL successfully created.\n");
write(handle, buf, strlen(buf));
close(handle);
}
return 0;
}

函数名: creattemp
功能: 创建一个新文件或重写一个已存在的文件
用法: int creattemp(const char *filename, int attrib);
程序例:
#include
#include
#include
int main(void)
{
int handle;
char pathname[128];
strcpy(pathname, "\\");
/* create a unique file in the root directory */
handle = creattemp(pathname, 0);
printf("%s was the unique file created.\n", pathname);
close(handle);
return 0;
}

函数名: cscanf
功能: 从控制台执行格式化输入
用法: int cscanf(char *format[,argument, ...]);
程序例:
#include
int main(void)
{
char string[80];
/* clear the screen */
clrscr();
/* Prompt the user for input */
cprintf("Enter a string with no spaces:");
/* read the input */
cscanf("%s", string);
/* display what was read */
cprintf("\r\nThe string entered is: %s", string);
return 0;
}

函数名: ctime
功能: 把日期和时间转换为字符串
用法: char *ctime(const time_t *time);
程序例:
#include
#include
int main(void)
{
time_t t;
time(&t);
printf("Today's date and time: %s\n", ctime(&t));
return 0;
}

函数名: ctrlbrk
功能: 设置Ctrl-Break处理程序
用法: void ctrlbrk(*fptr)(void);
程序例:
#include
#include
#define ABORT 0
int c_break(void)
{
printf("Control-Break pressed. Program aborting ...\n");
return (ABORT);
}
int main(void)
{
ctrlbrk(c_break);
for(;;)
{
printf("Looping... Press to quit:\n");
}
return 0;
}