当前位置：首页 > news >正文

NX二次开发：ListingWindow窗口的应用

news 2025/8/27 3:10:05

一、概述

在NX二次开发的学习中，浏览博客时发现看到[社恐猫]和[王牌飞行员_里海]这两篇博客中写道有关信息窗口内容的打印和将窗口内容保存为txt,个人人为在二次开发项目很有必要，因此做以下记录。

ListingWindow信息窗口发送信息四种位置类型

设置ListingWindow信息窗口发送信息的位置

二、显示类型

2.1信息只显示在ListingWindow信息窗口

关键代码：

	UF_initialize();//启动计时器UF_timer_t timer = { 0 };UF_begin_timer(&timer);//创建块UF_FEATURE_SIGN sign = UF_NULLSIGN;double corner_pt[3] = { 0.0, 0.0, 0.0 };char * edge_len[3] = { "100", "100", "100" }; tag_t blk_obj_id = NULL_TAG;UF_MODL_create_block1(sign, corner_pt, edge_len, &blk_obj_id);//结束计时器UF_timer_values_t ValueTime = { 0 };UF_end_timer(timer, &ValueTime);//打印统计信息std::ostringstream temp;temp << "耗时：cpu time:" << ValueTime.cpu_time << "\n" << "耗时：real time:" << ValueTime.real_time<< "\n"<<"提示:保存信息窗口内容至:"<< "D:\\GetRunningTime.txt";std::string tempStr = temp.str();NXOpen::Session* theSession = NXOpen::Session::GetSession();NXOpen::ListingWindow* list = theSession->ListingWindow();list->SelectDevice(NXOpen::ListingWindow::DeviceType::DeviceTypeWindow,"");//默认类型可省略if (!list->IsOpen()) list->Open();list->WriteLine(tempStr.c_str());list->Close();UF_terminate();

2.2信息只保存在ListingWindow窗口D:\\GetRunningTime.txt

关键代码：

	UF_initialize();//启动计时器UF_timer_t timer = { 0 };UF_begin_timer(&timer);//创建块UF_FEATURE_SIGN sign = UF_NULLSIGN;double corner_pt[3] = { 0.0, 0.0, 0.0 };char * edge_len[3] = { "100", "100", "100" }; tag_t blk_obj_id = NULL_TAG;UF_MODL_create_block1(sign, corner_pt, edge_len, &blk_obj_id);//结束计时器UF_timer_values_t ValueTime = { 0 };UF_end_timer(timer, &ValueTime);//打印统计信息std::ostringstream temp;temp << "耗时：cpu time:" << ValueTime.cpu_time << "\n" << "耗时：real time:" << ValueTime.real_time<< "\n"<<"提示:保存信息窗口内容至:"<< "D:\\GetRunningTime.txt";std::string tempStr = temp.str();NXOpen::Session* theSession = NXOpen::Session::GetSession();NXOpen::ListingWindow* list = theSession->ListingWindow();//信息只保存在ListingWindow窗口D:\\GetRunningTime.txtlist->SelectDevice(NXOpen::ListingWindow::DeviceType::DeviceTypeFile, "D:\\GetRunningTime.txt");if (!list->IsOpen()) list->Open();list->WriteLine(tempStr.c_str());list->Close();list->SelectDevice(NXOpen::ListingWindow::DeviceType::DeviceTypeWindow, "");UF_terminate();

2.3信息显示在ListingWindow窗口并保存信息内容至D:\\GetRunningTime.txt

关键代码：

	UF_initialize();//启动计时器UF_timer_t timer = { 0 };UF_begin_timer(&timer);//创建块UF_FEATURE_SIGN sign = UF_NULLSIGN;double corner_pt[3] = { 0.0, 0.0, 0.0 };char * edge_len[3] = { "100", "100", "100" }; tag_t blk_obj_id = NULL_TAG;UF_MODL_create_block1(sign, corner_pt, edge_len, &blk_obj_id);//结束计时器UF_timer_values_t ValueTime = { 0 };UF_end_timer(timer, &ValueTime);//打印统计信息std::ostringstream temp;temp << "耗时：cpu time:" << ValueTime.cpu_time << "\n" << "耗时：real time:" << ValueTime.real_time<< "\n"<<"提示:保存信息窗口内容至:"<< "D:\\GetRunningTime.txt";std::string tempStr = temp.str();NXOpen::Session* theSession = NXOpen::Session::GetSession();NXOpen::ListingWindow* list = theSession->ListingWindow();//信息显示在ListingWindow窗口并保存信息内容至D:\\GetRunningTime.txtlist->SelectDevice(NXOpen::ListingWindow::DeviceType::DeviceTypeFileAndWindow, "D:\\GetRunningTime.txt");if (!list->IsOpen()) list->Open();list->WriteLine(tempStr.c_str());list->Close();list->SelectDevice(NXOpen::ListingWindow::DeviceType::DeviceTypeWindow,"");UF_terminate();

2.4DeviceType::DeviceTypeNone既不显示在ListingWindow窗口，也不保存信息至D:\\GetRunningTime.txt这里不进行说明。

查看全文

http://www.lryc.cn/news/309110.html