PERCCLI命令行程序说明
Dell EMC PowerEdge RAID控制器(PERC)命令行界面(CLI)实用程序用于管理RAID卡相关的配置和信息，命令的子命令和选项如下所示：
help - lists all the commands with their usage. E.g. perccli help
<command> help - gives details about a particular command. E.g. perccli add helpList of commands:Commands Description
-------------------------------------------------------------------
add Adds/creates a new element to controller like VD,Spare..etc
delete Deletes an element like VD,Spare
show Displays information about an element
set Set a particular value to a property
get Get a particular value to a property
compare Compares particular value to a property
start Start background operation
stop Stop background operation
pause Pause background operation
resume Resume background operation
download Downloads file to given device
expand expands size of given drive
insert inserts new drive for missing
transform downgrades the controller
/cx Controller specific commands
/ex Enclosure specific commands
/sx Slot/PD specific commands
/vx Virtual drive specific commands
/dx Disk group specific commands
/fall Foreign configuration specific commands
/px Phy specific commands
/[bbu|cv] Battery Backup Unit, Cachevault commands
命令使用示例：
1）perccli64.exe show 列出机器当前的RAID卡信息：
Status Code = 0
Status = Success
Description = NoneNumber of Controllers = 1
Host Name = XXXXX
Operating System = Windows Server 2008 R2System Overview :
===============---------------------------------------------------------------------------
Ctl Model Ports PDs DGs DNOpt VDs VNOpt BBU sPR DS EHS ASOs Hlth
---------------------------------------------------------------------------0 PERCH710Mini 8 8 1 0 2 0 NdAtn On 3 N 0 NdAtn
---------------------------------------------------------------------------Ctl=Controller Index|DGs=Drive groups|VDs=Virtual drives|Fld=Failed
PDs=Physical drives|DNOpt=DG NotOptimal|VNOpt=VD NotOptimal|Opt=Optimal
Msng=Missing|Dgd=Degraded|NdAtn=Need Attention|Unkwn=Unknown
sPR=Scheduled Patrol Read|DS=DimmerSwitch|EHS=Emergency Hot Spare
Y=Yes|N=No|ASOs=Advanced Software Options|BBU=Battery backup unit
Hlth=Health|Safe=Safe-mode boot
2）“perccli64.exe /c0/bbu show all”显示电池的信息
Controller = 0
Status = Success
Description = NoneBBU_Info :
========-------------------------
Property Value
-------------------------
Type BBU
Voltage 11 mV
Current 0 mA
Temperature 51 C
Battery State Dgrd-NdAtn
-------------------------BBU_Firmware_Status :
===================-------------------------------------------------
Property Value
-------------------------------------------------
Charging Status None
Voltage Low
Temperature OK
Learn Cycle Requested Yes
Learn Cycle Active No
Learn Cycle Status OK
Learn Cycle Timeout No
I2C Errors Detected No
Battery Pack Missing No
Replacement required Yes
Remaining Capacity Low Yes
Periodic Learn Required No
Transparent Learn No
No space to cache offload No
Pack is about to fail & should be replaced No
Cache Offload premium feature required No
Module microcode update required No
-------------------------------------------------GasGaugeStatus :
==============-------------------------------------
Property Value
-------------------------------------
Fully Discharged Yes
Fully Charged Yes
Discharging No
Initialized No
Remaining Time Alarm No
Remaining Capacity Alarm No
Terminate Discharge Alarm No
Over Temperature No
Charging Terminated No
Over Charged No
Relative State of Charge 0%
Charger System State Unknown
Remaining Capacity 0
Full Charge Capacity 35
Is SOH Good No
Battery backup charge time 0 hour(s)
-------------------------------------BBU_Capacity_Info :
=================------------------------------------------------------
Property Value
------------------------------------------------------
Relative State of Charge 0%
Absolute State of charge 0%
Remaining Capacity 0 mAh
Full Charge Capacity 35 mAh
Run time to empty Battery is not being charged
Average time to empty 0 min
Average Time to full Battery is not being charged
Cycle Count 7
Max Error 0%
Remaining Capacity Alarm 0 mAh
Remining Time Alarm 0 minutes(s)
------------------------------------------------------BBU_Design_Info :
===============-----------------------------------
Property Value
-----------------------------------
Date of Manufacture 18/07/2011
Design Capacity 90 mAh
Design Voltage 0 mV
Specification Info 0
Serial Number 0
Pack Stat Configuration 0
Manufacture Name
Device Name
Device Chemistry
Battery FRU N/A
Transparent Learn 1
App Data 0
Module Version 0148 03
-----------------------------------BBU_Properties :
==============--------------------------------------------------------------
Property Value
--------------------------------------------------------------
Auto Learn Period 90d (7776000 seconds)
Next Learn time 2021/05/19 01:06:41 (674701601 seconds)
Learn Delay Interval 0 hour(s)
Auto-Learn Mode Transparent
“perccli64.exe /c0/bbu start learn” 对电池进行校准
“perccli64.exe /c0/bbu show learn” 查看校准信息
3）“perccli /cx download file=”升级固件，其中 x 是控制器索引编号, 固件刷新完成后，按照指导重新引导服务器。
4）其他示例：
perccli /c0 show termlog
perccli /c0/v0 show all > virtualdrivers.txt
perccli /c0 /eall /sall show all > disks.txt
perccli /c0 show eventloginfo > eventloginfo.txt
…
安装PERC CLI方法：
1）在Windows中解压安装包即可。
2）在Linux中，运行rpm -ivh 安装percli RPM，或要升级percli RPM，运行rpm -Uvh 。然后进入目录/opt/MegaRAID/perccli，运行./perccli或./perccli64。
3）在VMware ESXi中，将VMware_PERCCLI_xxxxx_x.x-xxx.xxxx.tar.gz解压到主机上的/vmfs/volume/datastore1，
a. 查看已安装的VIB软件包的列表：esxcli software vib list
b. 安装VIB软件包：esxcli software vib install -v /vmfs/volume/datastore1/vmware-perccli-xxx.xxxx.xxxx.xxxx.vib --no-sig-check，其中/vmfs/volume/datastore1是VIB的路径详情。
c. 删除安装的VIB：esxcli software vib remove -n=vmware-esx-perccli.vib --force
d. 运行：/opt/lsi/perccli/perccli
参考：
适用于所有PERC控制器的Windows PERCCLI实用程序
PERCCLI Utility For All PERC9 Controllers
Dell PERC H730/H730P/H830/FD33xS/FD33xD Mini/适配器 RAID 控制器固件版本 25.5.6.0009
Dell EMC PowerEdge RAID Controller CLI Reference Guide