expect程序交互学习

一、初级语法学习

1.使用expect进行ssh另一台机器

[root@localhost ~]# yum install -y expect  #先安装expect
[root@localhost ~]# vim expect1.sh
#!/usr/bin/expect
spawn ssh root@192.168.68.244
expect {"yes/no" {send "yes\r";exp_continue}  #捕获yes/no，然后输出yes"password:" {send "root\r"}  #捕获password然后输入密码“root”
}
interact

2.ip和密码由用户传参登录另一台机器

[root@localhost ~]# vim expect2.sh 
#!/usr/bin/expect
set ip [ lindex $argv 0 ]
set pass [ lindex $argv 1]
set timeout 5
spawn ssh root@$ip
expect {"yes/no" {send "yes\r";exp_continue} "password:" {send "$pass\r"}  
}
interact
[root@localhost ~]# expect -f expect2.sh 192.168.68.244 root  #执行

二、例子

1.A机器远程登录到B机器进行操作

[root@localhost ~]# vim expect3.sh 
#!/usr/bin/expect
set ip 192.168.68.244
set pass root
set timeout 5
spawn ssh root@$ip
expect {"yes/no" {send "yes\r";exp_continue} "password:" {send "$pass\r"}  
}
expect "#"
send "rm -rf /tmp/*\r"
send "touch /tmp/file{1..3}\r"
send "date\r"
send "exit\r"
expect eof
[root@localhost ~]# chmod +x expect3.sh
[root@localhost ~]# ./expect3.sh

2.控制多台机器创建用户

第一步：先将需要创建用户的机器的ip和密码写在ip.txt
[root@localhost ~]# echo  192.168.68.244 root > ip.txt
第二步：开始编写脚本
[root@localhost ~]# vim expect4.sh 
#!/bin/bash
while read ip pass
do/usr/bin/expect <<-END &>/dev/nullspawn ssh root@$ipexpect {"yes/no" {send "yes\r";exp_continue} "password:" {send "$pass\r"}}expect "#" { send "useradd yy1;rm -rf /tmp/*;exit\r" }expect eof
END
done < /root/ip.txt
[root@localhost ~]# chmod +x expect4.sh
[root@localhost ~]# ./expect4.sh