当前位置：首页 > article >正文

DAY 35 超大力王爱学Python

article 2025/8/2 20:48:12

知识点回顾：

三种不同的模型可视化方法：推荐torchinfo打印summary+权重分布可视化
进度条功能：手动和自动写法，让打印结果更加美观
推理的写法：评估模式

作业：调整模型定义时的超参数，对比下效果。

import torch
import torch.nn as nn
import torch.optim as optim
from sklearn.datasets import load_iris
from sklearn.model_selection import train_test_split
from sklearn.preprocessing import MinMaxScaler
import time
import matplotlib.pyplot as plt
from tqdm import tqdm# 设置GPU设备
device = torch.device("cuda:0" if torch.cuda.is_available() else "cpu")
print(f"使用设备: {device}")# 加载鸢尾花数据集
iris = load_iris()
X = iris.data  # 特征数据
y = iris.target  # 标签数据# 划分训练集和测试集
X_train, X_test, y_train, y_test = train_test_split(X, y, test_size=0.2, random_state=42)# 归一化数据
scaler = MinMaxScaler()
X_train = scaler.fit_transform(X_train)
X_test = scaler.transform(X_test)# 将数据转换为PyTorch张量并移至GPU
X_train = torch.FloatTensor(X_train).to(device)
y_train = torch.LongTensor(y_train).to(device)
X_test = torch.FloatTensor(X_test).to(device)
y_test = torch.LongTensor(y_test).to(device)# 定义不同配置的模型
class MLP1(nn.Module):def __init__(self):super(MLP1, self).__init__()self.fc1 = nn.Linear(4, 10)  # 原始配置self.relu = nn.ReLU()self.fc2 = nn.Linear(10, 3)def forward(self, x):out = self.fc1(x)out = self.relu(out)out = self.fc2(out)return outclass MLP2(nn.Module):def __init__(self):super(MLP2, self).__init__()self.fc1 = nn.Linear(4, 20)  # 增加隐藏层大小self.relu = nn.ReLU()self.fc2 = nn.Linear(20, 3)def forward(self, x):out = self.fc1(x)out = self.relu(out)out = self.fc2(out)return outclass MLP3(nn.Module):def __init__(self):super(MLP3, self).__init__()self.fc1 = nn.Linear(4, 10)  # 增加一层隐藏层self.relu1 = nn.ReLU()self.fc2 = nn.Linear(10, 10)self.relu2 = nn.ReLU()self.fc3 = nn.Linear(10, 3)def forward(self, x):out = self.fc1(x)out = self.relu1(out)out = self.fc2(out)out = self.relu2(out)out = self.fc3(out)return out# 训练函数
def train_model(model, optimizer, criterion, num_epochs=20000):model.to(device)losses = []epochs = []start_time = time.time()with tqdm(total=num_epochs, desc="训练进度", unit="epoch") as pbar:for epoch in range(num_epochs):outputs = model(X_train)loss = criterion(outputs, y_train)optimizer.zero_grad()loss.backward()optimizer.step()if (epoch + 1) % 200 == 0:losses.append(loss.item())epochs.append(epoch + 1)pbar.set_postfix({'Loss': f'{loss.item():.4f}'})if (epoch + 1) % 1000 == 0:pbar.update(1000)if pbar.n < num_epochs:pbar.update(num_epochs - pbar.n)time_all = time.time() - start_timeprint(f'Training time: {time_all:.2f} seconds')# 测试模型model.eval()with torch.no_grad():outputs = model(X_test)_, predicted = torch.max(outputs, 1)accuracy = (predicted == y_test).sum().item() / y_test.size(0)return losses, epochs, accuracy# 配置1：原始配置
model1 = MLP1()
optimizer1 = optim.SGD(model1.parameters(), lr=0.01)
criterion = nn.CrossEntropyLoss()
print("训练配置1：原始配置")
losses1, epochs1, acc1 = train_model(model1, optimizer1, criterion)# 配置2：增加隐藏层大小
model2 = MLP2()
optimizer2 = optim.SGD(model2.parameters(), lr=0.01)
print("训练配置2：增加隐藏层大小")
losses2, epochs2, acc2 = train_model(model2, optimizer2, criterion)# 配置3：增加网络深度
model3 = MLP3()
optimizer3 = optim.SGD(model3.parameters(), lr=0.01)
print("训练配置3：增加网络深度")
losses3, epochs3, acc3 = train_model(model3, optimizer3, criterion)# 配置4：使用Adam优化器
model4 = MLP1()
optimizer4 = optim.Adam(model4.parameters(), lr=0.001)  # Adam通常需要更小的学习率
print("训练配置4：使用Adam优化器")
losses4, epochs4, acc4 = train_model(model4, optimizer4, criterion)# 配置5：增加正则化
model5 = MLP1()
optimizer5 = optim.SGD(model5.parameters(), lr=0.01, weight_decay=0.001)  # L2正则化
print("训练配置5：增加L2正则化")
losses5, epochs5, acc5 = train_model(model5, optimizer5, criterion)# 可视化比较
plt.figure(figsize=(12, 8))
plt.plot(epochs1, losses1, label='原始配置 (Acc: {:.2f}%)'.format(acc1*100))
plt.plot(epochs2, losses2, label='增加隐藏层大小 (Acc: {:.2f}%)'.format(acc2*100))
plt.plot(epochs3, losses3, label='增加网络深度 (Acc: {:.2f}%)'.format(acc3*100))
plt.plot(epochs4, losses4, label='Adam优化器 (Acc: {:.2f}%)'.format(acc4*100))
plt.plot(epochs5, losses5, label='L2正则化 (Acc: {:.2f}%)'.format(acc5*100))
plt.xlabel('Epoch')
plt.ylabel('Loss')
plt.title('不同超参数配置的训练损失比较')
plt.legend()
plt.grid(True)
plt.show()# 打印最终准确率比较
print("\n准确率比较：")
print(f"配置1（原始）: {acc1*100:.2f}%")
print(f"配置2（增加隐藏层大小）: {acc2*100:.2f}%")
print(f"配置3（增加网络深度）: {acc3*100:.2f}%")
print(f"配置4（Adam优化器）: {acc4*100:.2f}%")
print(f"配置5（L2正则化）: {acc5*100:.2f}%")使用设备: cuda:0
训练配置1：原始配置
训练进度: 100%|██████████| 20000/20000 [00:12<00:00, 1626.00epoch/s, Loss=0.0623]
Training time: 12.30 seconds
训练配置2：增加隐藏层大小
训练进度: 100%|██████████| 20000/20000 [00:12<00:00, 1622.88epoch/s, Loss=0.0615]
Training time: 12.33 seconds
训练配置3：增加网络深度
训练进度: 100%|██████████| 20000/20000 [00:16<00:00, 1182.20epoch/s, Loss=0.0475]
Training time: 16.92 seconds
训练配置4：使用Adam优化器
训练进度: 100%|██████████| 20000/20000 [00:16<00:00, 1225.55epoch/s, Loss=0.0466]
Training time: 16.32 seconds
训练配置5：增加L2正则化
训练进度: 100%|██████████| 20000/20000 [00:13<00:00, 1530.57epoch/s, Loss=0.0698]

准确率比较：配置1（原始）: 96.67% 配置2（增加隐藏层大小）: 96.67% 配置3（增加网络深度）: 100.00% 配置4（Adam优化器）: 100.00% 配置5（L2正则化）: 96.67%